[Hammarlund] SP-600 RF Deck

[Dave Franklin]

Bob,

For hard to get to places where a solder sucker will not work, solder braid 
will help remove the excess
solder.  A little liquid flux on the braid works wonders.

Dave Franklin
W4DEF


----- Original Message ----- 
From: "Al Parker" <anchor at ec.rr.com>
To: "Bob Young" <youngbob53 at msn.com>; <hammarlund at mailman.qth.net>
Sent: Monday, July 21, 2008 7:36 PM
Subject: Re: [Hammarlund] SP-600 RF Deck


> hemostats
>
> ----- Original Message ----- 
> From: "Bob Young" <youngbob53 at msn.com>
> To: <hammarlund at mailman.qth.net>
> Sent: Monday, July 21, 2008 7:26 PM
> Subject: [Hammarlund] SP-600 RF Deck
>
>
>
> Yes, the Weller gun I have is getting in their fine with no problems and 
> is melting the soldier, my main problem is and Al Parker pointed it out is 
> I need a good soldier sucker that can get in there and suck the soldier 
> out of the joints so I can actually see where the wires are wrapped around 
> the lugs. My usual (lousy) method of melting and then pulling the wires 
> out of the lugs with a pair of needle nose pliers is not working, can 
> anyone recommend some good ones?
>
> Bob Young
> KB1OKL