[Hammarlund] Re: Hammarlund Digest, Vol 14, Issue 18

[Edward B Richards]

Check with Carol Doda, KTVU (I think), channel 36 (I think(), San
Francisco. She is (was) quite a stripper.

73, Ed Richards K6UUZ
AMI member #1534


On Sat, 26 Mar 2005 14:03:10 EST DAVEINBHAM at aol.com writes:
> Boomer,
> What stripper would you recommend ?
>  I have tried several strippers with rather poor results. In the end 
> I 
> usually sand blast at the local auto shop to get the muck caused by 
> the stripper off 
> the panel.
> Any suggestions ?
> 
> Kindest regards,
> Dave
>
*************************************************************************
*****
> *********
> 
> > Just don't let your friend sandblast the panel to strip it. Raises
> > hell with the recessed lettering. Bead blasting or good ol' 
> stripper
> > is a better bet.
> > 
> > ~ Boomer,  KA1KAQ
> > 
> 
> _______________________________________________
> List Administrator: Duane Fischer W8DBF
> ** For Assistance: dfischer at usol.com **
> ----
> http://mailman.qth.net/mailman/listinfo/hammarlund
>