[Ham-Mac] remote fldigi from Mac to PC

[Alan Bomberger]

Mac to Mac is trivial.   Have the Navigator working on the Mac with Fldigi.

In Preferences/Sharing enable Screen Sharing.

On the MacBookAir open a finder window and note in the left panel of the finder
window under "Shared" your remote Mac will be listed.

Click on it and a Finder window opens.

There should be a small button near the top of the window labeled 
Screen Sharing.

Click on that and in a few seconds a large window will open with your remote
Mac's screen.   Use your mouse and keyboard in that window exactly as you would
were you sitting at the Mac.


On May 30, 2016, at 5:59 AM, NN4BJ <NN4BJ at cfl.rr.com> wrote:

> I understand this is possible , but have not quite figured out how to do it yet.  Not a network guy, but have a local LAN with PC or Mac (A/B Switch) connected to IC-756ProIII via Navigator.  Would like to use the radio with my MacBookAir from the house out to my shack.
> 
> Does anyone have step-by-step kind of like Dummies guide for doing this?  Or point me to where this might be described for a novice.
> 
> Bruce/NN4BJ
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>