[Ham-Mac] Need Help for a fldigi/K3 Interface
Clifford Hynds
vk2ccj at gmail.com
Fri Oct 11 07:49:16 EDT 2013
I am using the US Navigator Interface with a Macmini , unfortunately the US
Navigator out of production ,
May be a secondhand one about.
Cliff VK2CCJ
On Fri, Oct 11, 2013 at 9:57 PM, Dick Kriss <aa5vu at att.net> wrote:
> I have been trying to help Richard, N5XRD, with his K3/fldigi interface
> and I do not have a K3 so I could not help. If you are a K3 user, please
> reply to Richard N5XRD direct.
>
> I had Dick download and install the Silicon Graphic USB to UART driver
> from
> http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx.
> When he opens the fldigi-3.21.76 Rig Control configuration panel, the
> SLAB_USBtoUART Device is not visible. Maybe the K3 uses a different device
> or maybe there is an issue with his recently repaired Mac by Apple?
>
> He could use some help from a K3 user
>
> 73 Dick AA5VU
> Kenwood user - never used a K3
>
>
>
> Begin forwarded message:
>
> > From: Richard W Hemingway <rheming1 at sbcglobal.net>
> > Subject: Re: Selecting calls in fldigi
> > Date: October 10, 2013 8:44:58 PM CDT
> > To: Dick Kriss <aa5vu at att.net>
> > Reply-To: Richard W Hemingway <rheming1 at sbcglobal.net>
> >
> > Dick,
> >
> > I have been using a SignalInk USB for the connection between he computer
> and radio. It plugs into the radio and the cable goes into the SL. Then
> it goes out of the SL and then to a USB port on the computer It has a
> volume control for both TX and RX/ volume. I have used it with the K3 for
> several years since I bought it. The RX seems to through to the computer
> with the volume control and it is still working fine. The TX control goes
> from the computer and usually show a PTT red llight on the SL and the red
> light on the K3. However now it shows the red light on the SL USB and the
> K3 but no power is shown on the power meter on the K3 or on the separate
> power meter. I am wondering if it is still working on TX?
> >
> > Hope this helps. It was working just fine on 9/1 my last contact,
> just before I took the comuter in to Apple on 10/6. They replaced a logic
> board and also did some hardware labor repair, not specified. They
> re-installed a new OS.
> >
> > Dick
> >
> >
>
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Ham-Mac
mailing list