[Ham-Mac] WSJT-X

[Clifford Hynds]

Thanks Dave,

After sending off the email i did the symbolic link someone else suggested
ln -s and seemed to do the trick,
working great nice not to have to boot into W7 , just need a couple more
progs ported and I can say goodbye to that other OS.
Runing a i5 Mac mini.

might try the wsjt-x config again but it irks now.

Cliff
vk2ccj

Running an Elecraft K3 by the way. PTT seems a bit sloppy like not clean
switching ok with Fldigi


On Mon, Aug 26, 2013 at 2:20 PM, Dave Wright - K3DCW
<hfradiopro at gmail.com>wrote:

> I'm using the Navigator here as well.
>
> Edit the wsjtx.ini file, and find the line that starts with CATport=  and
> make it read CATport=/dev/cu.NavCAT-----00000020A
>
> Then save the file.  Start WSJTX and go to the preferences.
>
> Enable CAT, select your rig.  Select "User" under CAT port
>
> Set your serial rate, etc.  Depending upon your rig, you might have to
> choose "Data instead of Mic (Next to serial rate)…I know I do on the K3.
>
> The near the top, under PTT method, select CAT (if your rig supports CAT
> PTT).
>
> Then click the Test CAT Control button and the Test PTT button to see if
> they work.  If not, you'll get feedback.  Same if they do work right.
>
>
> If you have to use a separate PTT port (no CAT PTT), then you'll have to
> enter your PTT port into the ini file under the PTTport line.  I haven't to
> do this, so the settings there are dependent upon your rig.
>
>
> --
> Dave Wright
> K3DCW
>
> "Real radio bounces off the sky"
>
>
> On Sunday,25 August 2013 at 23:19 , Clifford Hynds wrote:
>
> > Hi,
> >
> > I am using a US Navigator Interface and have it working fine on VOX but
> not
> > sure what I am doing wrong for the PTT and CAT functions, tried editing
> the
> > ini file as suggested and selected USER as the CAT interface but the
> radio
> > above ?
> >
> > My devices as in /dev are as follows
> >
> > cu.NavCAT-----00000020A
> > cu.NavConfig--00000022B
> > cu.NavFSK-----00000021B
> > cu.NavPTT-----00000020B
> > cu.NavRS232---00000022A
> > cu.NavWkey----00000021A
> > tty.NavCAT-----00000020A tty.NavConfig--00000022B
> tty.NavFSK-----00000021B
> > tty.NavPTT-----00000020B tty.NavRS232---00000022A
> tty.NavWkey----00000021A
> >
> > Thanks for any help
> > Cliff VK2CCJ
> > Great to see another Ham Program on OSX.
> > ______________________________________________________________
> > Ham-Mac mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Ham-Mac at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>