[Ham-Mac] WSJT-X

[Dave Wright - K3DCW]

I've noticed the same thing, Cliff, in regards to the PTT on the K3 and WJST-X. "Sloppy" is a good description, but it seems to work ok.  

Dave  

--  
Dave Wright
K3DCW

"Real radio bounces off the sky"


On Monday,26 August 2013 at 03:27 , Clifford Hynds wrote:

> Thanks Dave,
>  
> After sending off the email i did the symbolic link someone else suggested
> ln -s and seemed to do the trick,
> working great nice not to have to boot into W7 , just need a couple more
> progs ported and I can say goodbye to that other OS.
> Runing a i5 Mac mini.
>  
> might try the wsjt-x config again but it irks now.
>  
> Cliff
> vk2ccj
>  
> Running an Elecraft K3 by the way. PTT seems a bit sloppy like not clean
> switching ok with Fldigi
>  
>  
> On Mon, Aug 26, 2013 at 2:20 PM, Dave Wright - K3DCW
> <hfradiopro at gmail.com (mailto:hfradiopro at gmail.com)>wrote:
>  
> > I'm using the Navigator here as well.
> >  
> > Edit the wsjtx.ini file, and find the line that starts with CATport= and
> > make it read CATport=/dev/cu.NavCAT-----00000020A
> >  
> > Then save the file. Start WSJTX and go to the preferences.
> >  
> > Enable CAT, select your rig. Select "User" under CAT port
> >  
> > Set your serial rate, etc. Depending upon your rig, you might have to
> > choose "Data instead of Mic (Next to serial rate)…I know I do on the K3.
> >  
> > The near the top, under PTT method, select CAT (if your rig supports CAT
> > PTT).
> >  
> > Then click the Test CAT Control button and the Test PTT button to see if
> > they work. If not, you'll get feedback. Same if they do work right.
> >  
> >  
> > If you have to use a separate PTT port (no CAT PTT), then you'll have to
> > enter your PTT port into the ini file under the PTTport line. I haven't to
> > do this, so the settings there are dependent upon your rig.
> >  
> >  
> > --
> > Dave Wright
> > K3DCW
> >  
> > "Real radio bounces off the sky"
> >  
> >  
> > On Sunday,25 August 2013 at 23:19 , Clifford Hynds wrote:
> >  
> > > Hi,
> > >  
> > > I am using a US Navigator Interface and have it working fine on VOX but
> > not
> > > sure what I am doing wrong for the PTT and CAT functions, tried editing
> >  
> >  
> > the
> > > ini file as suggested and selected USER as the CAT interface but the
> >  
> >  
> > radio
> > > above ?
> > >  
> > > My devices as in /dev are as follows
> > >  
> > > cu.NavCAT-----00000020A
> > > cu.NavConfig--00000022B
> > > cu.NavFSK-----00000021B
> > > cu.NavPTT-----00000020B
> > > cu.NavRS232---00000022A
> > > cu.NavWkey----00000021A
> > > tty.NavCAT-----00000020A tty.NavConfig--00000022B
> >  
> >  
> > tty.NavFSK-----00000021B
> > > tty.NavPTT-----00000020B tty.NavRS232---00000022A
> >  
> >  
> > tty.NavWkey----00000021A
> > >  
> > > Thanks for any help
> > > Cliff VK2CCJ
> > > Great to see another Ham Program on OSX.
> > > ______________________________________________________________
> > > Ham-Mac mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Ham-Mac at mailman.qth.net
> > >  
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> >  
> >  
> >  
> >  
> >  
> > ______________________________________________________________
> > Ham-Mac mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Ham-Mac at mailman.qth.net
> >  
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>  
>  
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
>  
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html