[Ham-Mac] WSJT-X

[Dave Wright - K3DCW]

I'm using the Navigator here as well.   

Edit the wsjtx.ini file, and find the line that starts with CATport=  and make it read CATport=/dev/cu.NavCAT-----00000020A

Then save the file.  Start WSJTX and go to the preferences.  

Enable CAT, select your rig.  Select "User" under CAT port

Set your serial rate, etc.  Depending upon your rig, you might have to choose "Data instead of Mic (Next to serial rate)…I know I do on the K3.  

The near the top, under PTT method, select CAT (if your rig supports CAT PTT).  

Then click the Test CAT Control button and the Test PTT button to see if they work.  If not, you'll get feedback.  Same if they do work right.  


If you have to use a separate PTT port (no CAT PTT), then you'll have to enter your PTT port into the ini file under the PTTport line.  I haven't to do this, so the settings there are dependent upon your rig.   


--  
Dave Wright
K3DCW

"Real radio bounces off the sky"


On Sunday,25 August 2013 at 23:19 , Clifford Hynds wrote:

> Hi,
>  
> I am using a US Navigator Interface and have it working fine on VOX but not
> sure what I am doing wrong for the PTT and CAT functions, tried editing the
> ini file as suggested and selected USER as the CAT interface but the radio
> above ?
>  
> My devices as in /dev are as follows
>  
> cu.NavCAT-----00000020A
> cu.NavConfig--00000022B
> cu.NavFSK-----00000021B
> cu.NavPTT-----00000020B
> cu.NavRS232---00000022A
> cu.NavWkey----00000021A
> tty.NavCAT-----00000020A tty.NavConfig--00000022B tty.NavFSK-----00000021B
> tty.NavPTT-----00000020B tty.NavRS232---00000022A tty.NavWkey----00000021A
>  
> Thanks for any help
> Cliff VK2CCJ
> Great to see another Ham Program on OSX.
> ______________________________________________________________
> Ham-Mac mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ham-mac
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ham-Mac at mailman.qth.net
>  
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html