[Ham-Mac] cocoaModem Observations & ?

[James Duffey]

On Mar 30, 2007, at 9:54 AM, Brian K.Short wrote:


 >One thing I notice is that the audio level is low as I try to print
 >RTTY on 20m.  I hadn't touched the front panel level control
 >on the DigiKeyer with any other program Mac or PC until now.

 >Once I adjust the audio level on the DigiKeyer it seems to
:work great.  (It came from the factory with the controls set
 >to mid-scale).

There are several places in CocoaMmodem to set the input levels, so  
play with those controls a bit.

 >I am looking at CM settings and I probably missed something
 >in the setup to also adjust audio level there.

As it comes form teh download, you need to set up the audio input  
level for each mode separately, although there is a preference where  
you can select the same input for each. You can use a separate input  
device for each mode, which is nice if you want to run a different  
radio for CW than you do for RTTY as an example. - Duffey
--
James Duffey KK6MC/5
Cedar Crest NM 87008
DM65