[Ham-Mac] cocoaModem Observations & ?

[Brian K.Short]

Yes, I did check that and it appears that the main RCVR
is on L while the SUB is on R.  With the SUB off, I see nothing
over there.

What you are describing sounds like a L/R isolation problem.
Was that with a DigiKeyer?

I see the possibility to "pad" the audio coming in, maybe to
accommodate those who tap off a speaker wire?

The 1/8" jack on the back of the FT-1000mp is line level.

It is no big deal, just the first time I had to touch a control on
the DigiKeyer.

Brian

On Mar 30, 2007, at 9:20 AM, Jack Brindle wrote:

> Make sure you have the right channel selected (L vs R). I found that  
> CocoaModem would copy, but not well, with the wrong channel (in my  
> case R). switching it to the other channel made things work quite  
> well!
>
> On Mar 30, 2007, at 8:54 AM, Brian K.Short wrote:
>
>> I am using cocoaModem with the DigiKeyer and FT-1000mp.
>>
>> One thing I notice is that the audio level is low as I try to print
>> RTTY on 20m.  I hadn't touched the front panel level control
>> on the DigiKeyer with any other program Mac or PC until now.
>>
>> Once I adjust the audio level on the DigiKeyer it seems to
>> work great.  (It came from the factory with the controls set
>> to mid-scale).
>>
>> I am looking at CM settings and I probably missed something
>> in the setup to also adjust audio level there.
>>
>> I am using the standard microHam FT-1000mp cable which
>> gets audio from the 1/8 stereo jack.  I am using (only) the
>> main receiver for RTTY at this time.
>> --
>> Brian --> http://users.wildblue.net/k7on/
>> "Blessed are the cracked, for they shall let in the light."
>>
>> _______________________________________________
>> Ham-Mac mailing list
>> Ham-Mac at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/ham-mac
>
> - Jack Brindle, W6FB
> ----------------------------------------------------------------------- 
> ----------------------
>
>
> _______________________________________________
> Ham-Mac mailing list
> Ham-Mac at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/ham-mac
>
>
--
Brian --> http://users.wildblue.net/k7on/
"Blessed are the cracked, for they shall let in the light."