[Ham-Mac] cocoaModem Observations & ?

[Jack Brindle]

Make sure you have the right channel selected (L vs R). I found that  
CocoaModem would copy, but not well, with the wrong channel (in my  
case R). switching it to the other channel made things work quite well!

On Mar 30, 2007, at 8:54 AM, Brian K.Short wrote:

> I am using cocoaModem with the DigiKeyer and FT-1000mp.
>
> One thing I notice is that the audio level is low as I try to print
> RTTY on 20m.  I hadn't touched the front panel level control
> on the DigiKeyer with any other program Mac or PC until now.
>
> Once I adjust the audio level on the DigiKeyer it seems to
> work great.  (It came from the factory with the controls set
> to mid-scale).
>
> I am looking at CM settings and I probably missed something
> in the setup to also adjust audio level there.
>
> I am using the standard microHam FT-1000mp cable which
> gets audio from the 1/8 stereo jack.  I am using (only) the
> main receiver for RTTY at this time.
> --
> Brian --> http://users.wildblue.net/k7on/
> "Blessed are the cracked, for they shall let in the light."
>
> _______________________________________________
> Ham-Mac mailing list
> Ham-Mac at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/ham-mac

- Jack Brindle, W6FB
------------------------------------------------------------------------ 
---------------------