[Ham-Mac] New members question packetograph

[Graham Pemberton]

Hi Steve,

Many thanks for your reply, I have now got things up and running  
following a video chat on ichat with Sergei KD6CJI, the only thing I  
can't the program to do now is send a beacon

73 de Graham G7NEH
On 16 Jul 2007, at 04:10, Steve Muncy wrote:

> I used Packetograph with a TM-D700 for awhile, but haven't since I  
> moved the rig to the car. I now use it almost exclusively with the  
> APRS-IS connection, but I've also used it the a KPC-9612 without  
> problems. Packets received that are outside the map area would  
> display in the packets window, but would not be listed in the list  
> or shown on the map since they are outside the coordinates defined  
> for the map.
>
>
> - 73 -
>
> Steve Muncy, NI5V
> AMSAT / QCWA / ARRL Life Member
> ni5v at arrl.net / smuncy at mac.com
>
>
> On Jul 9, 2007, at 8:09 PM, Graham Pemberton wrote:
>
>> Hi all,
>>
>> I have just downloaded and installed Packetograph on a imac G5,  
>> I'm using a TM-D700 which is going through a Keyspan serial to USB  
>> adaptor, the connection appears to be working fine as I can see  
>> packets received displayed in the packet view window however  
>> nothing is displayed on the map or list windows the TNC is  
>> operating in KISS mode and I am able to set this within the program.
>>
>> has anyone out there used this program, I would be grateful for  
>> any tip and advice
>>
>> Many thanks
>> Graham G7NEH
>>
>> _______________________________________________
>> Ham-Mac mailing list
>> Ham-Mac at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/ham-mac
>
> _______________________________________________
> Ham-Mac mailing list
> Ham-Mac at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/ham-mac