[Ham-Computers] Using USB printer for DOS program??

Sat, 08 Jun 2002 11:37:21 -0700

Bob,

Iam assuming you dialing into some for of ISP and that TCP/IP is configued
for
DHCP. Dial into the ISP and then bring up the DOS window. Type winipcfg and
look and see if you have the IP address, netmask etc. See if there is a
default gateway set. Then type ping XXX.XXX.XXX.XXX or the IP address of the
default gateway. You should see a reply "imcp TTL=250ms" which is the time
it took for the IP address to reply. If all this works, then, type telnet
www.yahoo.com and tell me shat it say, if not, telnet needs to be
re-installed
or installed.

Mike

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of [email protected]
Sent: Saturday, June 08, 2002 10:26 AM
To: [email protected]
Subject: Re: [Ham-Computers] Using USB printer for DOS program??

Saw your knowledgeable reply on this topic so took the liberty of writing
you
with my own and different problem.

Im using Logger ham logging software  with a windows 98 HP 500 mhz system
that in the past worked well.  But following a virus I reformatted the HD
and
reinstalled  my software from scratch.  Now when I  attempt to use Telnet it
gives a message that my ISP connection has not been established even tho it
has been.

Ive tried  everything I can think of  but with no  success.  Any
suggestions?

Bob
_______________________________________________
Ham-Computers mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/ham-computers