[Hallicrafters] Bristol drivers

[Langston, Mike]

I don't think it will "snap off" like you expect. I would rather try sawing/grinding/filing off the worn end then dressing up the burrs with a fine Dremel tool or some such. 

Whatever you try, if it doesn't work you can buy replacements so go for it.

Mike KL7CD

Sent from my iPhone

On Dec 4, 2012, at 7:12 PM, "Rick Gouge" <rickgouge at shaw.ca> wrote:

> I have a set of Bristol Drivers here and the main ones i want to use are warn out on the tips. I am thinking of putting one of the drivers into a vise with just the tip of the driver sticking up out of the vise jaw and snap the tip off. The last thing you want to do is file or grind the tip off to avoid burrrs. What do you think? Am i on track?
>   Rick VE7RiK
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>