[Hallicrafters] FPM300 bandswitch question

[Ron Kolarik]

Try here first:
http://www.sdp-si.com/
Then: http://www.amazonsupply.com
used to be SmallParts.

Ron
K0IDT


----- Original Message ----- 
From: "Bob Flye" <swlandham at rocketmail.com>
To: <Hallicrafters at mailman.qth.net>
Sent: Tuesday, August 21, 2012 8:33 PM
Subject: [Hallicrafters] FPM300 bandswitch question


Greetings all,
My FPM300 is now powering up without issues (smoke) I pulled the front cover off to 
replace the dial cord that was in place of the toothed belt. I found a toothed belt 
for the bandswitch on eBay. The cord worked surprisingly well, but I pulled the dial 
cord off, only to find one of the toothed pulleys was missing and a brass gizmo was in 
its place.
In looking for a replacement pulley, I stumbled upon gears for RC cars, have not been 
to a hobby shop yet to see if one might work, but thought I would toss it out here for 
suggestions.
Thanks!


72/73
Bob, AD7BP


"You are boldly going where no man knows what he is doing"  -Maarten Schmidt, Palomar 
astronomer-
______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html