[Hallicrafters] FPM300 bandswitch question

[Dale Parfitt]

Hi Bob,
Give this site a look:
http://www.sdp-si.com/

I recently found a spur gear that I needed for a Morrow TX from their site. 
It wasn't cheap- but spot on and fast delivery.

GL,

Dale W4OP
----- Original Message ----- 
From: "Bob Flye" <swlandham at rocketmail.com>
To: <Hallicrafters at mailman.qth.net>
Sent: Tuesday, August 21, 2012 9:33 PM
Subject: [Hallicrafters] FPM300 bandswitch question


Greetings all,
My FPM300 is now powering up without issues (smoke) I pulled the front cover 
off to replace the dial cord that was in place of the toothed belt. I found 
a toothed belt for the bandswitch on eBay. The cord worked surprisingly 
well, but I pulled the dial cord off, only to find one of the toothed 
pulleys was missing and a brass gizmo was in its place.
In looking for a replacement pulley, I stumbled upon gears for RC cars, have 
not been to a hobby shop yet to see if one might work, but thought I would 
toss it out here for suggestions.
Thanks!


72/73
Bob, AD7BP


"You are boldly going where no man knows what he is doing"  -Maarten 
Schmidt, Palomar astronomer-
______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5215 - Release Date: 08/21/12