[Hallicrafters] Re: SX-28 dummy antenna.

[Waldo Magnuson]

Hi John,
    Regarding the use of the "dummy antenna" connection for aligning the 
SX-28, the way I read the manual is to connect the 200 mmf (pf) 
capacitor in series with the signal generator hot lead and the A1 
antenna terminal, leaving the jumper across A2 (manual has a mistake 
here stating A1) and ground.  The low side of the generator goes to 
chassis ground or to the antenna ground.  Use the 200 mmf capacitor for 
Band 1 only.  On bands 2, 3, 4, 5 and 6 use a 400 ohm resistor instead 
of the capacitor.
73,  Skip Magnuson  W7WGM