[Hallicrafters] HT-37 Electrolytic Cpapcitor Working Voltage

[Duane Fischer, W8DBF]

Not necessarily with today's higher line current! Why gamble, get the right one.



----------
From: Chuck Tifft <chuckt_w6rd at yahoo.com>
To: dhallam at rapidsys.com; Hallicrafters List <hallicrafters at mailman.qth.net>
Subject: Re: [Hallicrafters] HT-37 Electrolytic Cpapcitor Working Voltage
Date: Saturday, May 29, 2004 2:02 AM

If  your replacement is rated at 450 DCVW(working volts), then I am sure is
will be fine. Many of the older caps rated for max volts. A cap that is
rated at 450 working volts is going to be good for at least another 10%
73's
Chuck
W6RD
----- Original Message ----- 
From: "David C. Hallam" <dhallam at rapidsys.com>
To: "Hallicrafters List" <hallicrafters at mailman.qth.net>
Sent: Saturday, May 29, 2004 10:32 AM
Subject: [Hallicrafters] HT-37 Electrolytic Cpapcitor Working Voltage


> I am replacing the electrolytic can in the low voltage supply or my HT-37.
> This capacitor is rated at 475 VDC.  I have a number of the can type
> electrolytic capacitors but the highest WV rating I have is 450 VDC.  Does
> that extra 25 VDC really make a difference?
>
> David C. Hallam KC2JD
>
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> ----
> http://mailman.qth.net/mailman/listinfo/hallicrafters


_______________________________________________
List Administrator: Duane Fischer, W8DBF **for assistance**
dfischer at usol.com
----
Hallicrafters Collectors International: http://www.w9wze.org
----
http://mailman.qth.net/mailman/listinfo/hallicrafters