[Hallicrafters] Re: SX-62A Output Transformer

[jugdriver]

Frank, 

I just bought (today) a Stancor A-8101 audio output transformer on eBay for 
a radio restoral I'm doing (Philco 7-610). The values for this transformer 
seem to be exactly what you are looking for:  500ohm |X| 3.2ohm & 6-8ohm . 
The only problem is that this specific model is no longer made so you may 
need to
try and track down a used or NOS item. 

Hope that helps ID a usable part for you. 

And you might want to look at the Stancor website and check out the many
audio transformers they currently make to see if one suits your needs should
you not be able to find an A-8101. 

Ken 

 


> I have a beautiful SX-62A that needs an audio output transformer. Original equipment
> is pair of 6V6's to 3.2, 8, and 500 ohms. Receiver was running fine, but I couldn't leave well
> enough alone, so I decided to clean the chassis with a spray bottle of "Fantastik".
> Apparently, some of it got inside the base of a 6V6, which developed an internal 
> short and took out the transformer. This info may have been posted already, but I have 
> searched the archives and couldn't find it. I don't need exact original, just one that will 
> go in the same space and supply common speaker impedances. Thanks for any help.
> Frank DePetrillo, W1EYH
> frankde at cox.net