[Hallicrafters] SX-62A Output Transformer

[Roy Morgan]

At 02:57 PM 9/23/03 -0400, Frank DePetrillo wrote:
>I have a beautiful SX-62A that needs an audio output transformer. Original 
>equipment
>is pair of 6V6's to 3.2, 8, and 500 ohms.

Frank,

You may need to do without the 500 ohm output tap. Here's what to do:

1) Measure the distance between mounting holes on the original transformer.

2) Go the the Hammond web page and find the transofrmer that fits:
<http://www.hammondmfg.com/125a.htm>
  -- A. Decide if you want wire leads for both primary and secondary.
  -- B. Pick the right transformer that fits.

3) Go to the AES page to see if they sell that transformer:
  <www.tubesadnmore.com>

  -- A. If so, order it.
  -- B. If not, find other Hammond distributors who do.

4) Wait till the thing arrives and install it.

5) Listen happily ever after.

Roy


- Roy Morgan, K1LKY since 1959 - Keep 'em Glowing!
7130 Panorama Drive, Derwood MD 20855
Home: 301-330-8828 Work: Voice: 301-975-3254,  Fax: 301-948-6213
roy.morgan at nist.gov --