[Hallicrafters] TO Keyer

[rdhalste]

As a SWAG I'm going to "guess" it's probably (notice all the weasel words)
the time constant capacitor.  It could be switch contacts, or low voltage,
but I'd bet on the cap. It's been my experience the tube can get pretty bad
before it affects anything as it only acts as a switch.

Check the tubes first as they are the easiest.  As has already been
mentioned there are a number of sources for manuals.

The circuit is pretty straight forward and relatively simple.

Roger Halstead (K8RI, EN73 & ARRL Life Member)
N833R, World's Oldest Debonair? (S# CD-2)
www.rogerhalstead.com


> Hello list.  I recently purchased a TO keyer and am having a problem with
> the speed control.  It appears that the high setting is not over 20 wpm
> which is the range of the low setting.  From my earlier experience, the
> high setting should be much much faster.  Any ideas??   Sandy, W9JOE
>
> ======================
> Sandy Swartzendruber
> sandy at precisionaudio.com
>
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> ----
> http://mailman.qth.net/mailman/listinfo/hallicrafters
>