[GreenKeys] 3D Printed ASR 33 Tape Punch Button (Part No. 183919)

[Clay Archer]

I made some out of clear casting epoxy.   I still have the rubber mold, I
can make more.


-----Original Message-----
From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Yarosalv Veremenko
Sent: Friday, May 05, 2023 9:50 AM
To: WAYNE; greenkeys at mailman.qth.net
Subject: Re: [GreenKeys] 3D Printed ASR 33 Tape Punch Button (Part No.
183919)

On 2023-05-04 14:37, WAYNE wrote:
 > They look nice but to keep the 33 as authentic as possible they should
 > be clear plastic.

Totally. I don't have 3D printer at home, so I just wanted to make 
something first to simply test it will work well. Before looking for a 
different roll of plastic, as well as tuning that machine to stop 
printing so bad.

Yaroslav
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool:
https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive:
http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive:
http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to carcher at parkcity.net