[GreenKeys] 3D Printed ASR 33 Tape Punch Button (Part No. 183919)

[Yarosalv Veremenko]

I don't think it's that important. Also I don't like giving people hard 
time :)

Yaroslav

On 2023-05-06 1:01, Clay Archer wrote:
> I made some out of clear casting epoxy.   I still have the rubber mold, I
> can make more.
> 
> 
> -----Original Message-----
> From: greenkeys-bounces at mailman.qth.net
> [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Yarosalv Veremenko
> Sent: Friday, May 05, 2023 9:50 AM
> To: WAYNE; greenkeys at mailman.qth.net
> Subject: Re: [GreenKeys] 3D Printed ASR 33 Tape Punch Button (Part No.
> 183919)
> 
> On 2023-05-04 14:37, WAYNE wrote:
>   > They look nice but to keep the 33 as authentic as possible they should
>   > be clear plastic.
> 
> Totally. I don't have 3D printer at home, so I just wanted to make
> something first to simply test it will work well. Before looking for a
> different roll of plastic, as well as tuning that machine to stop
> printing so bad.
> 
> Yaroslav
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool:
> https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to carcher at parkcity.net
>