[GreenKeys] Model 14 printer code bars

[John, W9DDD]

I was looking the other day in the parts bulletin and couldn't find the 
term stop arm.  I suspect it is part of the cam. Hopefully someone can 
confirm that for us.

Look at page 13 of 1117B and blow it up about 200%.  you'll see two 6863 
cam sleeve disc parts.  In between those is the cam sleeve.  As near as 
I can tell all the other arrows in between are pointing to various bits 
of felt on the cam sleeve.

1117B is at https://www.navy-radio.com/manuals/tty/1117B-4402.pdf

---
----
You said "tomorrow" yesterday.

The above comments or recommendations are SWAG. Use at your own risk.
John, W9DDD

On 6/27/2023 10:09 PM, Eric Moore wrote:
> https://youtu.be/C26eQ10_Fe4
>
> How are these bars supposed to act? Since I can not move the far right 
> (as seen from the front) bar forward, the printer can not fully cycle.
>
> Also, see attached for a picture of the stop arm that is broken. I 
> looked for a part number but no luck.
>
> Seems like 1 step forward, about 5 steps back with this machine. 
> Thanks for any help!
>
> -Eric
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230628/386c70a5/attachment.html>