[GreenKeys] Model 14 printer code bars

[Eric Moore]

Hello everyone! FYI, a replacement cam sleeve with stop arm is on its way.

That just leaves the code bar issue (a greenkeyer sent me some guidance on
how to troubleshoot) and about a month of adjustments before I am printing
on the 14!

Thank you all as always,

-Eric


On Tue, Jun 27, 2023, 10:09 PM Eric Moore <mooreericnyc at gmail.com> wrote:

> https://youtu.be/C26eQ10_Fe4
>
> How are these bars supposed to act? Since I can not move the far right (as
> seen from the front) bar forward, the printer can not fully cycle.
>
> Also, see attached for a picture of the stop arm that is broken. I looked
> for a part number but no luck.
>
> Seems like 1 step forward, about 5 steps back with this machine. Thanks
> for any help!
>
> -Eric
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230630/48baf90a/attachment.html>