I was looking the other day in the parts bulletin and couldn't find the term stop arm. I suspect it is part of the cam. Hopefully someone can confirm that for us.
Look at page 13 of 1117B and blow it up about 200%. you'll see two 6863 cam sleeve disc parts. In between those is the cam sleeve. As near as I can tell all the other arrows in between are pointing to various bits of felt on the cam sleeve.
1117B is at https://www.navy-radio.com/manuals/tty/1117B-4402.pdf
--- ---- You said "tomorrow" yesterday. The above comments or recommendations are SWAG. Use at your own risk. John, W9DDD
https://youtu.be/C26eQ10_Fe4
How are these bars supposed to act? Since I can not move the far right (as seen from the front) bar forward, the printer can not fully cycle.
Also, see attached for a picture of the stop arm that is broken. I looked for a part number but no luck.
Seems like 1 step forward, about 5 steps back with this machine. Thanks for any help!
-Eric
______________________________________________________________ GreenKeys mailing list Home: http://mailman.qth.net/mailman/listinfo/greenkeys Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.htmlThis list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]