[GreenKeys] Hqppy 4th! 3d printed keys, and a 14 issue

[Eric Moore]

https://youtu.be/3EXzbT7oKTA

Little update, I think I have the printer adjusted. Now I am struggling
with the cam stack pushing a release out of the way at the right time to
prevent the main shaft seizing.

-Eric

On Tue, Jul 4, 2023, 8:32 AM Eric Moore <mooreericnyc at gmail.com> wrote:

> Hi all, happy 4th for those in the US!
>
> First, attached you will find my first attempts at 3d printed key
> replacements. These are on my GPE perforator. Not perfrct, but better than
> nothing!
>
> Second, https://youtu.be/5lkIvRWcB4A
>
> This new model 14 printer I received appears to be further bent, or I
> missed an alignment when mating the printer to the main shaft.
>
> I am about ready to try and go back to the old frozen up printer, which at
> least fully cycled properly. I am reading the manuals, but printer
> replacement instructions I have not found.
>
> If anyone has any ideas before I begin deep cleaning the old printer, I am
> all ears! Thanks!
>
> -Eric
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230704/a67c9578/attachment.html>