[GreenKeys] Hqppy 4th! 3d printed keys, and a 14 issue

[Eric Moore]

Hi all, happy 4th for those in the US!

First, attached you will find my first attempts at 3d printed key
replacements. These are on my GPE perforator. Not perfrct, but better than
nothing!

Second, https://youtu.be/5lkIvRWcB4A

This new model 14 printer I received appears to be further bent, or I
missed an alignment when mating the printer to the main shaft.

I am about ready to try and go back to the old frozen up printer, which at
least fully cycled properly. I am reading the manuals, but printer
replacement instructions I have not found.

If anyone has any ideas before I begin deep cleaning the old printer, I am
all ears! Thanks!

-Eric
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230704/08817c06/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20230702_174608.jpg
Type: image/jpeg
Size: 1716939 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230704/08817c06/attachment-0001.jpg>