[GreenKeys] Kleinschmidt TT-4C/TG not printing

[Kevin H. Phillips]

On 10/4/2022 9:25 PM, Jim Cooper wrote:
> Your selector magnets may be wired
> for 20 mA loop current (holding magnet),
> in which case 30mA or more would be
> way too much current.

I will see if I have a TU with a loop that can be adjusted that low.  
The one I was using does not.  The adjustment on the TT-4 would not go 
lower than 30ma (according to the meter).


73

Kevin

>
>
>