[GreenKeys] Kleinschmidt TT-4C/TG not printing

[Duncan Brown]

Kleinschmidts do not use a holding magnet and they all have a switch 
(and/or plug) to change between 20 & 60 ma.

I think one of Kevin's problems was that he was putting 60 ma in while 
the TT-4 was set for "VF" (20ma)

I have no explanation of why he can type on the machine OK, but it runs 
closed when he tries to receive ITTY.

Duncan
K2OEQ


On 05-Oct-22 07:15, Kevin H. Phillips wrote:
> On 10/4/2022 9:25 PM, Jim Cooper wrote:
>> Your selector magnets may be wired
>> for 20 mA loop current (holding magnet),
>> in which case 30mA or more would be
>> way too much current.
>
> I will see if I have a TU with a loop that can be adjusted that low.  
> The one I was using does not.  The adjustment on the TT-4 would not go 
> lower than 30ma (according to the meter).
>
>
> 73
>
> Kevin
>
>>
>>
>>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: 
>>>> https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: 
>>>> http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: 
>>>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: 
>>>> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to duncanancy at earthlink.net