[GreenKeys] Need some "drawings" on items in Model33 ASR

[tomas at tlec.se]

Obviously I need to explain a little bit more.

What I am looking for is the two Hub-halves that has spare part number
182935 and the spool 182918 (probably a piece of plastic pipe or so)

 

With best regards

Tomas Larsson

Borås Sweden

 

Från: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net>
För tomas at tlec.se
Skickat: den 30 mars 2021 20:09
Till: GreenKeys at mailman.qth.net
Ämne: [GreenKeys] Need some "drawings" on items in Model33 ASR

 

Dear group.

I need some final things, before I can assemble my 33ASR.

I am missing spool hub for the punch-tape, the Idea is to print it my self,
so if anyone could do a simple drawing and some photos on it, I would be
very grateful.

The same applies to the plastic thing on the Upstop mechanism, would be
happy if I can get some sort of simple drawing, so I can print it as well.

 

Does anyone know what color on the stand, RAL or something.

 

I suppose there should be some type of pipe between the punch and the
chadbox, anyone got a photo and size?

 

I will put all 3D files on thingiverse, for anyone to use in the future.

 

With best regards

Tomas Larsson

Borås Sweden

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20210330/33576d46/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SpoolHub.jpg
Type: image/jpeg
Size: 437833 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20210330/33576d46/attachment-0001.jpg>