[GreenKeys] Need some "drawings" on items in Model33 ASR

[john at toebes.com]

I’ve just pulled the paper tape tube off my machine and measured it with my
calipers to get a model for you:

 

https://cad.onshape.com/documents/5ed84f55ffab1a69e66ced45/w/c05cbe196c7bd93
1bee62514/e/ad6486615ac8d3a97a173f87

 

If you are looking for the Chad Box:

 

https://cad.onshape.com/documents/2cbbf35c02c4cfa06ae90965/w/abeb2b8bd11fbed
805681265/e/192c60658ef050ecdf09d475

 

I’m not sure what you mean about the plastic thing on the Upstop mechanism

but if I can figure it out, I can measure it and model it quickly.

 

*	John Toebes
*	Science Olympiad Codebusters – Event Supervisor -
<https://www.soinc.org/codebusters-c> National and
<https://ncscienceolympiad.ncsu.edu/resources/high-school/codebusters/>
North Carolina 
*	919-622-2041

 

From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net>
On Behalf Of tomas at tlec.se
Sent: Tuesday, March 30, 2021 2:09 PM
To: GreenKeys at mailman.qth.net
Subject: [GreenKeys] Need some "drawings" on items in Model33 ASR

 

Dear group.

I need some final things, before I can assemble my 33ASR.

I am missing spool hub for the punch-tape, the Idea is to print it my self,
so if anyone could do a simple drawing and some photos on it, I would be
very grateful.

The same applies to the plastic thing on the Upstop mechanism, would be
happy if I can get some sort of simple drawing, so I can print it as well.

 

Does anyone know what color on the stand, RAL or something.

 

I suppose there should be some type of pipe between the punch and the
chadbox, anyone got a photo and size?

 

I will put all 3D files on thingiverse, for anyone to use in the future.

 

With best regards

Tomas Larsson

Borås Sweden

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20210330/82ae133e/attachment.html>