[GreenKeys] ITTY/Autostart/Europe-Greenwich
Dave Wade
dave.g4ugm at gmail.com
Thu Jun 13 18:07:39 EDT 2019
Tom,
I think it’s the sound card config on this PC. I can see the display ok but I can hear interference on the signal. The plan was to be able to use RTTY Terminal to drive my Creed which is set for 50 Baud.
Dave
G4UGM
From: Thomas Tillson <til128 at aol.com>
Sent: 13 June 2019 22:43
To: dave.g4ugm at gmail.com
Subject: Re: [GreenKeys] ITTY/Autostart/Europe-Greenwich
Hi Dave:
If you are trying to copy either ITTY or Autostart try clicking "HAM" on the top center of the control panel.
If it is The Europe channel, don't forget that it is at 50 Baud and that "mark is 1280.
You can change that by clicking on the left side of the waterfall until you see the M&S.
Hope this helps.
Tom
In a message dated 6/13/2019 5:09:08 PM Eastern Standard Time, dave.g4ugm at gmail.com <mailto:dave.g4ugm at gmail.com> writes:
Tom,
I seem to be getting garbage using MMTTY. Has some sent images or something?
Dave
From: Thomas Tillson <til128 at aol.com <mailto:til128 at aol.com> >
Sent: 13 June 2019 04:15
To: dave.g4ugm at gmail.com <mailto:dave.g4ugm at gmail.com> ; GreenKeys at mailman.qth.net <mailto:GreenKeys at mailman.qth.net>
Subject: Re: [GreenKeys] ITTY/Autostart/Europe-Greenwich
Hi all:
The Europe channel is now up and running - as are the rest of the channels.
Enjoy!
Tom WB2TTY
ITTY Listening:
ITTY: HTTP://INTERNET-TTY.NET:8000/ITTY
AUTO: HTTP://INTERNET-TTY.NET:8030/AUTOSTART
GREENWICH: HTTP://INTERNET-TTY.NET:8040/EUROPE
In a message dated 6/12/2019 7:31:28 PM Eastern Standard Time, dave.g4ugm at gmail.com <mailto:dave.g4ugm at gmail.com> writes:
I don’t seem to be able to connect to the Europe channel…
… the other two are fine…
Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190613/4a5294f7/attachment.html>
More information about the GreenKeys
mailing list