[GreenKeys] TT-100G Selector Assembly

[The Rices]

Thanks all for the advice. I made the adjustments to the springs per Steve 
and re-installed the unit now with all the screws tightened down.  It is now 
typing every time I push a key and most keys seem to work and print 
correctly. Will have to look closely why the letter j types but paten does 
not move over a space for the next character. Figs works but not ltrs key 
and I am thinking that might be something to do with the functions selector.

Anyway thanks for all the good advice and it is at least printing each time 
which it was not doing before.

Steve
N4YZA

-----Original Message----- 
From: Steve Garrison
Sent: Monday, January 06, 2014 9:32 AM
To: 'The Rices'
Cc: greenkeys at mailman.qth.net
Subject: RE: [GreenKeys] TT-100G Selector Assembly

Thinking back 40 some odd years I don't think I ever used a gauge to set
those screws.  Just set them so that it takes a small amount of force to
move from one side to the other with the "same" amount of force on both
sides and the armature staying the way you moved it while power is off.
Doing lots and lots of machines it was a "feel" that was acquired!

Steve G./N4TTY