[GreenKeys] Re-inker for Model 28ASR

[David Bonamo]

Thanks for the info, I guess I should have also asked if anyone had a manual 
or a least schematic or a source for one.

I purchased 2 on ebay recently, the lot had 1 built and 1 still unassembled.

Thanks


----- Original Message ----- 
From: <wa2hwj at att.net>
To: <greenkeys at mailman.qth.net>
Sent: Tuesday, January 01, 2008 12:35 PM
Subject: [GreenKeys] Re-inker for Model 28ASR


>I came across an old RTTY Journal yesterday that showed a modified reinker
> installed on a 28ASR. The reinker was the Model 14 type, just the 
> re-inking roller
> on a short angle bracket. It is shown mounted on the ASR's paper tape 
> reel, right about
> where the roller guide wire bracket is located (adjacent to the typing 
> unit's
> leftside ribbon mechanism). I am pretty sure the reinker
> Don has on Ebay (Kleinschmidt type) would also work with a little 
> tweaking.
>
> 73,
> Jack WA2HWJ
>
> NNNN
> _______________________________________________
> GreenKeys mailing list
> GreenKeys at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/greenkeys