[GreenKeys] Re-inker for Model 28ASR

[David Bonamo]

Sorry folks I replied to the wrong message please ignore this one.


----- Original Message ----- 
From: "David Bonamo" <bonamod at bellsouth.net>
To: <greenkeys at mailman.qth.net>
Sent: Tuesday, January 01, 2008 12:50 PM
Subject: Re: [GreenKeys] Re-inker for Model 28ASR


> Thanks for the info, I guess I should have also asked if anyone had a 
> manual or a least schematic or a source for one.
>
> I purchased 2 on ebay recently, the lot had 1 built and 1 still 
> unassembled.
>
> Thanks
>
>
> ----- Original Message ----- 
> From: <wa2hwj at att.net>
> To: <greenkeys at mailman.qth.net>
> Sent: Tuesday, January 01, 2008 12:35 PM
> Subject: [GreenKeys] Re-inker for Model 28ASR
>
>
>>I came across an old RTTY Journal yesterday that showed a modified reinker
>> installed on a 28ASR. The reinker was the Model 14 type, just the 
>> re-inking roller
>> on a short angle bracket. It is shown mounted on the ASR's paper tape 
>> reel, right about
>> where the roller guide wire bracket is located (adjacent to the typing 
>> unit's
>> leftside ribbon mechanism). I am pretty sure the reinker
>> Don has on Ebay (Kleinschmidt type) would also work with a little 
>> tweaking.
>>
>> 73,
>> Jack WA2HWJ
>>
>> NNNN
>> _______________________________________________
>> GreenKeys mailing list
>> GreenKeys at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/greenkeys
>
> _______________________________________________
> GreenKeys mailing list
> GreenKeys at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/greenkeys