[FADCA] Re:Help

[Jdaughtry]

Virg
 Remove the battery from the tnc and remove the power supply from the tnc as
well let set for a hour or so and try it them may be something hung in the
chip on the kpc-3
 also does the squelch on he radio effect the tnc  i am not familure with
the kenwood radio
 john
----- Original Message ----- 
From: <Kg4fcd at aol.com>
To: <fadca at mailman.qth.net>
Sent: Friday, December 17, 2004 11:02 AM
Subject: [FADCA] Re:Help


> My packet set up is:
> Kantronics KPC3+ TNC. It is connected to a Kenwood Tm-G707A.
> The radio was just returned from Kenwood telling me it and the cable were
ok.
> I have not as yet heard from Quatrains.
> The problem;
> With everything connected except the antenna to the radio. The TNC is
turned
> on and everything is ok and it signs on like it should. As soon as I turn
on
> the radio, the TNC goes into a hard Receive mode. Both the radio and the
TNC
> are set to 1200 baud.
> I have tried a hard reset on the TNC and nothing changes. I have tried
> changing them both to 9600 baud but that does not help.
> I would like to upgrade to a Kantronics 9612 but at this point I am
tempted
> to chuck the whole mess.
> Until IVAN came thru everything worked fine. At that time I had a power
surge
> that killed the TNC but Kantronics says it has been fixed.
> I also have a new Kenwood TM-G707 that does the same thing which points me
> back to the TNC. Or can there be something else?
>
> Help,
>
> 73
> Virgil Gibbs Kg4fcd
> Manager NTS Eagle Net
> WCF Information Officer
> Mentor Online EMCOM Study
> Packet Mail Box Kg4fcd-1
> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.296 / Virus Database: 265.5.4 - Release Date: 12/15/04
>
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.5.4 - Release Date: 12/15/04