[Elecraft] Fwd: [Elecraft-K3] Sub Rx deaf but only on 24MHz

[Joe Subich, W4TV]

Or alternatively, have selected AUX.

Turn on Sub RX, Hold A/B (B Set) and note the antenna shown
in the VFO B area.  With B Set engaged, tapping ANT will toggle
Main/Aux.

Note this setting is saved per band.

73,

    ... Joe, W4TV

On 2026-03-06 12:18 PM, Mike Harris via Elecraft wrote:
> Oops,
> 
> Finger trouble. That should read ANT1 or ANT2.
> 
> Regards,
> 
> Mike VP8NO
> 
> 
> -------- Forwarded Message --------
> Subject: Re: [Elecraft-K3] Sub Rx deaf but only on 24MHz
> Resent-Date: Fri, 06 Mar 2026 09:04:58 -0800
> Resent-From: mike.harris at horizon.co.fk
> Date: Fri, 6 Mar 2026 14:04:43 -0300
> From: Michael Harris via groups.io <mike.harris=horizon.co.fk at groups.io>
> Reply-To: Elecraft-K3 at groups.io
> To: Elecraft-K3 at groups.io
> 
> Stewart, If you have the internal ATU check that you have the right 
> antenna selected. You might be listening to an open port.
> 
> ANT selected ANT1 or ANMT2 showing on the display. This selection is 
> memorised per band.
> 
> Regards,
> 
> Mike VP8NO
> 
> On 06/03/2026 13:37, Stewart G4AFF via groups.io wrote:
>> I have noticed, as I've tried to work 3Y0K on 24MHz, that if I select 
>> Subin order to hear the sub-receiver in my right ear I hear no 
>> signals. I do hear noise at about the same level as the main rx. This 
>> only occurs on 24MHz, no other bands.
>> Does anyone know where I should start looking to resolve this annoying 
>> issue?
>>
>> Thanks,
>> Stewart G4AFF
> 
>