[Elecraft] Fwd: [Elecraft-K3] Sub Rx deaf but only on 24MHz

[Mike Harris]

Oops,

Finger trouble. That should read ANT1 or ANT2.

Regards,

Mike VP8NO


-------- Forwarded Message --------
Subject: Re: [Elecraft-K3] Sub Rx deaf but only on 24MHz
Resent-Date: Fri, 06 Mar 2026 09:04:58 -0800
Resent-From: mike.harris at horizon.co.fk
Date: Fri, 6 Mar 2026 14:04:43 -0300
From: Michael Harris via groups.io <mike.harris=horizon.co.fk at groups.io>
Reply-To: Elecraft-K3 at groups.io
To: Elecraft-K3 at groups.io

Stewart, If you have the internal ATU check that you have the right 
antenna selected. You might be listening to an open port.

ANT selected ANT1 or ANMT2 showing on the display. This selection is 
memorised per band.

Regards,

Mike VP8NO

On 06/03/2026 13:37, Stewart G4AFF via groups.io wrote:
> I have noticed, as I've tried to work 3Y0K on 24MHz, that if I select Subin order to hear the sub-receiver in my right ear I hear no signals. I do hear noise at about the same level as the main rx. This only occurs on 24MHz, no other bands.
> Does anyone know where I should start looking to resolve this annoying issue?
> 
> Thanks,
> Stewart G4AFF


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#44938): https://groups.io/g/Elecraft-K3/message/44938
Mute This Topic: https://groups.io/mt/118173642/324658
Group Owner: Elecraft-K3+owner at groups.io
Unsubscribe: 
https://groups.io/g/Elecraft-K3/leave/10909103/324658/667303318/xyzzy 
[mike.harris at horizon.co.fk]
-=-=-=-=-=-=-=-=-=-=-=-