[Elecraft] PSK31 with a KX2

[Bill Johnson]

Bob, when you get it working, then do an immediate backup in case you enter the wrong information after that.  You can at least get back to where you were.  When I am told I have a great signal on SSB, I do an immediate backup to preserve my settings.

Bill
K9YEQ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Bob Liesen
Sent: Tuesday, March 9, 2021 7:11 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] PSK31 with a KX2

All,
  Pulling my hair out here.  I have been trying to get my KX2 to work on PSK31.  After many attempts I got it working perfectly with DigiPan, but
I'm not sure how.   Then something happened that I have found is a problem
for me with this radio.  I must have turned a knob, hit a key or some such thing as it stopped decoding.  I find the knobs and buttons are too close to one another for these old eyes and fingers.
  I am using DATA A mode, I have the BW at 4kHz and center freq of 1.5  AGC is off, RF gain is 0dB.  NB and NR is off.  I suspected I might have screwed up the USB/LSB setting somehow, but HamScope has a "reverse"
function which does not help.
 Is there anyone who could walk me through the settings that might be screwing this up?
Tnx es 73
Bob  WB0POQ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com