[Elecraft] PSK31 with a KX2

[Bob Liesen]

Gang,
  Well,  I solved the no decode problem with my KX2.  I was not decoding
much PSK31 because there is not much around to decode.  Since I was active
on digital modes, things have evolved (imagine that!).  Once I boned up on
the fact that most of the warbling one hears is FT8, and set up a program
for same, I'm decoding lots of signals.  I am truly a dinosaur.....😕
Thanks to all and stay well!

Bob WB0POQ

On Wed, Mar 10, 2021 at 5:20 PM Bill Johnson <k9yeq at live.com> wrote:

> Bob, when you get it working, then do an immediate backup in case you
> enter the wrong information after that.  You can at least get back to where
> you were.  When I am told I have a great signal on SSB, I do an immediate
> backup to preserve my settings.
>
> Bill
> K9YEQ
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net>
> On Behalf Of Bob Liesen
> Sent: Tuesday, March 9, 2021 7:11 PM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] PSK31 with a KX2
>
> All,
>   Pulling my hair out here.  I have been trying to get my KX2 to work on
> PSK31.  After many attempts I got it working perfectly with DigiPan, but
> I'm not sure how.   Then something happened that I have found is a problem
> for me with this radio.  I must have turned a knob, hit a key or some such
> thing as it stopped decoding.  I find the knobs and buttons are too close
> to one another for these old eyes and fingers.
>   I am using DATA A mode, I have the BW at 4kHz and center freq of 1.5
> AGC is off, RF gain is 0dB.  NB and NR is off.  I suspected I might have
> screwed up the USB/LSB setting somehow, but HamScope has a "reverse"
> function which does not help.
>  Is there anyone who could walk me through the settings that might be
> screwing this up?
> Tnx es 73
> Bob  WB0POQ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9yeq at live.com
>