[Elecraft] PSK31 with a KX2

[Ian, NV4C]

Bob,

Have you tried tweaking the gain on the KX2, to see if you can decode 
with the gain increased? Just spitballing, but that may help.

73 de,

Ian, NV4C

On 3/9/21 8:11 PM, Bob Liesen wrote:
> All,
>    Pulling my hair out here.  I have been trying to get my KX2 to work on
> PSK31.  After many attempts I got it working perfectly with DigiPan, but
> I'm not sure how.   Then something happened that I have found is a problem
> for me with this radio.  I must have turned a knob, hit a key or some such
> thing as it stopped decoding.  I find the knobs and buttons are too close
> to one another for these old eyes and fingers.
>    I am using DATA A mode, I have the BW at 4kHz and center freq of 1.5  AGC
> is off, RF gain is 0dB.  NB and NR is off.  I suspected I might have
> screwed up the USB/LSB setting somehow, but HamScope has a "reverse"
> function which does not help.
>   Is there anyone who could walk me through the settings that might be
> screwing this up?
> Tnx es 73
> Bob  WB0POQ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nv4c.ian at gmail.com