[Elecraft] K3 on wsjt-x

[Bill Frantz]

It sounds like your audio is not getting to the K3. There are 
many places it can get lost, including wsjt-x, the selection of 
output devices in wsjt-x, the OS audio chain (seen frequently in 
Windows, but also other OSes), and in the K3 -- are you sure 
your computer is connected to the transmit audio.

73 Bill AE6JV

On 7/3/21 at 5:35 PM, doug49707 at gmail.com (doug dietz) wrote:

>I have k3 with all the options available except finals. I have 
>installed the ftdi driver. The receiver sends frequency and 
>decodes wsjt signals correctly.   In the wsjt program the cat 
>test turns green and the ptt  works ok. When I call cq the 
>transmitter is keyed but no power is sent out. I think I’m in 
>the wrong mode. Any  suggestions. I cannot get it to “data 
>a”?  HELP

-----------------------------------------------------------------------
Bill Frantz        | When an old person dies, a   | Periwinkle
(408)348-7900      | library burns. - Joe McGawon | 150 
Rivermead Rd #235
www.pwpconsult.com | Irish Ethnographer           | 
Peterborough, NH 03458