[Elecraft] K3 on wsjt-x

[Dave]

To get to DATA-A, use the DATA MD button, it is the long press of AFX.

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 7/3/21 3:20 PM, Dave wrote:
> Hi Doug,
> I transmit using DATA-A mode.  You might also check to be sure you have 
> your computer audio feeding the active input port on the K3.
> 
> If you get really stuck, send me a not off list, and one of us can call 
> the other, and I can talk you thought rig setup.
> 
> 73, and thanks,
> Dave (NK7Z)
> https://www.nk7z.net
> ARRL Volunteer Examiner
> ARRL Technical Specialist, RFI
> ARRL Asst. Director, NW Division, Technical Resources
> 
> On 7/3/21 2:35 PM, doug dietz wrote:
>> Guys
>> I have k3 with all the options available except finals. I have 
>> installed the ftdi driver. The receiver sends frequency and decodes 
>> wsjt signals correctly.   In the wsjt program the cat test turns green 
>> and the ptt  works ok. When I call cq the transmitter is keyed but no 
>> power is sent out. I think I’m in the wrong mode. Any  suggestions. I 
>> cannot get it to “data a”?  HELP
>> WD8Z. Doug
>>
>> Sent from my iPhone
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to dave at nk7z.net
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net