[Elecraft] K3 on wsjt-x

[Dave]

Hi Doug,
I transmit using DATA-A mode.  You might also check to be sure you have 
your computer audio feeding the active input port on the K3.

If you get really stuck, send me a not off list, and one of us can call 
the other, and I can talk you thought rig setup.

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 7/3/21 2:35 PM, doug dietz wrote:
> Guys
> I have k3 with all the options available except finals. I have installed the ftdi driver. The receiver sends frequency and decodes wsjt signals correctly.   In the wsjt program the cat test turns green and the ptt  works ok. When I call cq the transmitter is keyed but no power is sent out. I think I’m in the wrong mode. Any  suggestions. I cannot get it to “data a”?  HELP
> WD8Z. Doug
> 
> Sent from my iPhone
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
>