[Elecraft] K3 shift-width/lo-hi
Bob McGraw K4TAX
rmcgraw at blomand.net
Tue Mar 31 11:21:47 EDT 2020
Not observed on my K3S, sn 10163 radio. And nothing shows on my P3.
73
Bob, K4TAX
On 3/30/2020 5:39 PM, Buck wrote:
> How about this one? K3S CW mode. Tone at 14.053.953 with shift at 650
> Hz, lox cut at .10 High cut at 1.20. Same tone at 7.026.765 and
> 21.074.113 but weaker. The tone is strong enough to show a spike on
> the P3.
>
> Tone goes away if I move the shift off 650 Hz or change the low cut or
> high cut. But the spike still appears on the P3 screen? Something in
> the P3?
>
> k4ia, Buck
> K3s# 11497
> Honor Roll 8B DXCC
> EasyWayHamBooks.com
>
> On 3/30/2020 5:50 PM, Keith Trinity WE6R wrote:
>> Don't forget to do the TX gain cal, that gets wiped during EE INIT.
>> Then save the config.
>> **BUT; You might try loading your saved config, then read my notes;
>> From my notes;
>>
>> *_Cannot toggle LEDs SHIFT LO CUT HI WIDTH TAPPING LOCKED in CW or
>> DATA mode(s) + N/A_*
>>
>> _Fix;_Turn off “CW QRQ” in config menu, or set “PB CTRL” to .05
>> instead of .01
>>
>> Notes; Any of the following, in any combination, will lock out the
>> toggle to HI CUT / LO CUT:
>>
>> CW mode and CW QRQ ON ("+" sign visible on LCD display, not flashing)
>>
>> CW mode and CONFIG:PB CTRL Shift=.01
>>
>> DATA mode (FSK/AFSK)
>>
>> Keith WE6R
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to radiok4ia at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
More information about the Elecraft
mailing list