[Elecraft] KX2: Is it possible to clear the clock with a command on the interface?

[Grant Youngman]

It is not a macro.  It’s under the Configuration tab of the KX2 Utility …. it will set the KX2 tie to your computer time.

Grant NQ5T

> On Apr 8, 2020, at 7:56 PM, Ron Rossi <kk1l at comcast.net> wrote:
> 
> I did not find a direct set for the clock. I know about the MN074; command to bring up the clock and then UP;/DN; to change the hour or min or sec from whatever it happens to be. Setting the time automatically would have to start from a known state.
> 
> 73 es God Bless de KK1L...Ron Rossi (kk1l at comcast.net) <><
> QTH: Jericho, Vermont
> My page: http://kk1l.com
> 
> On 4/8/2020 19:45, Grant Youngman wrote:
>> You can set the tine from the KX2 utility ….
>> 
>>> On Apr 8, 2020, at 7:41 PM, KK1L <kk1l at comcast.net> wrote:
>>> 
>>> Folks,
>>> 
>>> Wondering if it is possible to send a command to clear the clock on the KX2.
>>> I am considering using a macros to set the time, but the menu only allows
>>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
>>> clear the clock to zero I could also set the time. I have looked through the
>>> command set pretty well and think the answer is "no", but figured I would
>>> ask.
>>> 
>