[Elecraft] KX2: Is it possible to clear the clock with a command on the interface?

[Ron Rossi]

I did not find a direct set for the clock. I know about the MN074; 
command to bring up the clock and then UP;/DN; to change the hour or min 
or sec from whatever it happens to be. Setting the time automatically 
would have to start from a known state.

73 es God Bless de KK1L...Ron Rossi (kk1l at comcast.net) <><
QTH: Jericho, Vermont
My page: http://kk1l.com

On 4/8/2020 19:45, Grant Youngman wrote:
> You can set the tine from the KX2 utility ….
>
>> On Apr 8, 2020, at 7:41 PM, KK1L <kk1l at comcast.net> wrote:
>>
>> Folks,
>>
>> Wondering if it is possible to send a command to clear the clock on the KX2.
>> I am considering using a macros to set the time, but the menu only allows
>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
>> clear the clock to zero I could also set the time. I have looked through the
>> command set pretty well and think the answer is "no", but figured I would
>> ask.
>>