[Elecraft] KX2: Is it possible to clear the clock with a command on the interface?

Ron Rossi kk1l at comcast.net
Wed Apr 8 20:21:34 EDT 2020


I just noticed that. It is greyed out for me. No option to click it.

73 es God Bless de KK1L...Ron Rossi (kk1l at comcast.net) <><
QTH: Jericho, Vermont
My page: http://kk1l.com

On 4/8/2020 20:00, Grant Youngman wrote:
> It is not a macro.  It’s under the Configuration tab of the KX2 Utility …. it will set the KX2 tie to your computer time.
>
> Grant NQ5T
>
>> On Apr 8, 2020, at 7:56 PM, Ron Rossi <kk1l at comcast.net> wrote:
>>
>> I did not find a direct set for the clock. I know about the MN074; command to bring up the clock and then UP;/DN; to change the hour or min or sec from whatever it happens to be. Setting the time automatically would have to start from a known state.
>>
>> 73 es God Bless de KK1L...Ron Rossi (kk1l at comcast.net) <><
>> QTH: Jericho, Vermont
>> My page: http://kk1l.com
>>
>> On 4/8/2020 19:45, Grant Youngman wrote:
>>> You can set the tine from the KX2 utility ….
>>>
>>>> On Apr 8, 2020, at 7:41 PM, KK1L <kk1l at comcast.net> wrote:
>>>>
>>>> Folks,
>>>>
>>>> Wondering if it is possible to send a command to clear the clock on the KX2.
>>>> I am considering using a macros to set the time, but the menu only allows
>>>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could
>>>> clear the clock to zero I could also set the time. I have looked through the
>>>> command set pretty well and think the answer is "no", but figured I would
>>>> ask.
>>>>



More information about the Elecraft mailing list