[Elecraft] KPA1500

[Nr4c]

Call support!

Sent from my iPhone
...nr4c. bill


> On Nov 28, 2018, at 6:58 PM, Bill Johnson <k9yeq at live.com> wrote:
> 
> Larry, not enough info to help out.  If you have followed the manual and experienced this you have something very serious happening.  You probably don’t have good load.  If you have a dummy load, then connect output to it and try again.   A call to tech support would be best bet in your case.
> 
> 73,
> 
> Bill
> K9YEQ
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Larry
> Sent: Wednesday, November 28, 2018 5:07 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KPA1500
> 
> My KPA1500 faults on all bands and goes offline.  The reset button quickly gets it back up only to fault again.  The error message is:
> 
>        Fault: 12V supply
>        10.8 volts
> 
> The line voltage is stable with a pair of #10’s going to the breaker box.
> 
> Anybody got any ideas before I call support?
> 
> Larry, WA9MAG
> 
> 
> Sent from Mail for Windows 10
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com