[Elecraft] KPA1500

[Bill Johnson]

Larry, not enough info to help out.  If you have followed the manual and experienced this you have something very serious happening.  You probably don’t have good load.  If you have a dummy load, then connect output to it and try again.   A call to tech support would be best bet in your case.

73,

Bill
K9YEQ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Larry
Sent: Wednesday, November 28, 2018 5:07 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KPA1500

My KPA1500 faults on all bands and goes offline.  The reset button quickly gets it back up only to fault again.  The error message is:

		Fault: 12V supply
		10.8 volts

The line voltage is stable with a pair of #10’s going to the breaker box.

Anybody got any ideas before I call support?

Larry, WA9MAG


Sent from Mail for Windows 10

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com